Leak detection in Murrieta is pinpointing a hidden leak — under the slab, inside a wall, or out in the yard — before it wrecks your floors or foundation. We locate it non-invasively with acoustic sensors, thermal imaging, and pressure testing, so the repair is precise instead of exploratory demolition.
Some of the most expensive water damage we see never started with a dramatic flood. It started with a slow, hidden leak behind a wall or under the slab that dripped for weeks — running up the water bill, warping floors, and growing mold before anyone saw a drop.
We locate hidden leaks without tearing your house apart. Acoustic sensors, thermal imaging, and pressure testing let us pinpoint the source so the repair is precise instead of exploratory. Then we coordinate the repair and handle the water damage that the leak already caused.
If your water bill spiked, you hear water running with everything off, or a spot on the floor is warm, call our team before the damage spreads.
Hidden leaks we track down
Slab leaks
Pressurized lines leaking under the concrete slab — slab leak water damage is common in Murrieta's tract homes.
In-wall pipe leaks
Drips inside wall cavities that show up as stains, bubbling paint, or musty smells.
Yard and main-line leaks
Wet spots in the yard or a meter that spins with no water running.
Pinhole copper leaks
Hard water eats copper from the inside — how hard water causes pinhole leaks.
Our Process
- 1
Symptom review
On arrivalWe start with the clues — bill history, meter behavior, stains, warm spots, and where you hear water.
- 2
Non-invasive detection
1–2 hoursAcoustic listening equipment, thermal cameras, and moisture meters narrow the leak to a precise location.
- 3
Pressure testing
Same visitWhere needed, we isolate and pressure-test lines to confirm the source before any wall or floor is opened.
- 4
Repair coordination & drying
Follow-upWe coordinate the repair with a licensed plumber and dry the damage the leak already caused.
What's Included
- Acoustic leak location
- Thermal imaging and moisture mapping
- Line isolation and pressure testing
- Precise leak pinpointing to limit demolition
- Repair coordination with licensed plumbers
- Drying of any resulting water damage
Leak Detection for Murrieta Homes
Two Murrieta realities make leak detection especially valuable here. First, most homes are slab-on-grade, so a failed line under the slab has nowhere to go but up and out. Second, the hard water in this area corrodes copper from the inside, so pinhole leaks are common as homes reach 20–30 years old.
That's exactly the age many tracts in The Colony, Mapleton, and Alta Murrieta are hitting now. A sudden jump in your RCWD or EVMWD bill is often the first clue.
Why Choose Restoration Murrieta for Leak Detection
Non-invasive, minimal demolition
Acoustic sensors, thermal cameras, and pressure testing pinpoint a hidden leak precisely, so we open only the exact spot instead of tearing out a whole wall or floor.
We find slab and in-wall leaks
Most Murrieta homes are slab-on-grade, so a failed line has nowhere to go but up. We locate slab, wall, yard, and pinhole leaks others miss.
One call covers it
We pinpoint the leak, coordinate the repair with a licensed plumber, and dry any water damage the leak already caused — so you're not juggling three vendors.
24/7 live answer, local crew
A real person answers any hour, and we dispatch from Jefferson Ave in central Murrieta, so a rising water bill or warm floor spot gets looked at fast.
Free estimate, no minimum
There's no charge to come look and no minimum to call — you get an upfront scope of the search before we start, so there are no surprises.
What It Costs — and How Insurance Works
Detection is priced by the complexity of the search — a single accessible line is quick; a slab leak under finished flooring takes more equipment and time. We're upfront about the scope before we start.
- Type of leak (fixture, in-wall, slab, or yard/main line)
- Accessibility and floor covering over the suspected area
- Equipment required (acoustic, thermal, pressure testing)
- Whether repair coordination and drying are needed after
- Extent of existing water damage found
Typical water damage cost ranges (2026)
Cost tracks most with the water category and area affected. As a general reference:
| Category | Typical cause | Est. / sq ft |
|---|---|---|
| Clean water | Burst supply line, sink or appliance overflow | ~$3.50 / sq ft |
| Gray water | Washing machine, dishwasher, or sump failure | ~$5.25 / sq ft |
| Black water | Sewage backups and storm flooding | ~$7.50 / sq ft |
A general reference only; your leak detection job is quoted firmly after a free on-site inspection — no charge to come look.
Read the 2026 Murrieta cost guideHow insurance usually works
- Sudden, accidental damage — burst pipes, appliance failures, storm intrusion — is usually covered by California homeowners policies.
- Gradual, long-term leaks and poor maintenance typically aren't, which is why documenting the cause and timeline matters.
- Sewage backup often needs a separate endorsement that isn't included by default.
- We document the loss with photos and moisture logs and bill your carrier directly where your policy allows.
General information, not insurance advice — always check your own policy.
Does California insurance cover water damage?Where We Provide Leak Detection
We provide leak detection across Murrieta's maturing neighborhoods, and the timing matters here. Many tracts in Central Park, Alta Murrieta, and Morningstar Ranch are reaching the 20-to-30-year mark where slab-on-grade lines and hard-water-corroded copper start to leak — often hidden under finished flooring. We bring the same acoustic and thermal tools to French Valley and Winchester. If your water bill jumped with no explanation, or you hear water running with everything off, that's the signature of a hidden leak we can pinpoint before it surfaces as damage.
View all 60 service areasLeak Detection FAQs
We use acoustic sensors that hear pressurized water escaping, thermal cameras that see temperature differences, and moisture meters — so we open only the precise spot, not the whole wall. See how pros find slab leaks.
A water bill that jumped for no reason, the sound of running water with everything off, warm spots on the floor, musty smells, or stains. More: hidden leak symptoms.
We pinpoint it and coordinate the repair with a licensed plumber, then handle the water damage cleanup and drying. That way one call covers the whole problem.
That's a classic hidden-leak signature. Call us to locate it before it surfaces as floor or wall damage.
Very — combining acoustic sensors, thermal imaging, and pressure testing usually pinpoints a leak to within inches, so the repair opens one small spot instead of a whole wall or floor. On rare complex cases we confirm by isolating and pressure-testing individual lines.
Don't let it wait. A pressurized slab leak runs constantly, wicking up into flooring and framing and driving your water bill while it grows mold underneath. The sooner we locate it, the smaller the repair and the water damage cleanup that follows.
Related Reading
Hidden Leak Symptoms: Warm Floor Spots, High Water Bills, and Running Water
Warm floor spots, a jumping water bill, running water you can't see, the hidden leak signs homeowners miss, plus a meter test you can do tonight.
How Pros Find Slab Leaks Without Tearing Up Your Whole Floor
Acoustic sensors, thermal imaging, and pressure testing pinpoint a slab leak so we open one spot, not your whole floor. Here's how it works.